sabato 28 novembre 2015

Ibanez differenti tipi di Wizard!

Negli anni 80' Ibanez ha scioccato il mondo degli interpreti cambiando radicalmente il modo di fare le chitarre; ma sopratutto i manici, realizzando il manico più sottile mai creato fino a quel momento il Wizard.
Negli anni la casa nipponica ha sviluppato diversi profili per diversi interpreti e per differenziarli li ha chiamati semplicemente Wizard, Wizard II, Wizard III.
Vediamo le principali differenze di ognuno di questi manici:

 Original Wizard--these are the original block-style neck joint necks and the thinnest.
Thickness at 1st fret: 17mm
Thickness at 12th fret: 19mm
Radius: 430mm
Scarf joint.
Most susceptible to warping, but thinnnest.

Vediamo che nel Wizard I è classificato come il più sottile con 17mm (millimetri) al primo tasto e solo 19 al 12.
Nelle note lo si definisce il più suscettibile ai cambi di temperatura (il manico è un pezzo solo nei primi esemplari).

Super Wizard--these are the 3 piece necks used on MIJ RGs between 1994 and 2002.
Thickness at 1st fret: 17mm
Thickness at 12th fret: 20mm (actually closer to 19.5mm)
Radius: 430mm
Still very thin, and more stable.

Il Super Wizard è sempre molto sottile ma al 12 i millimetri sono 20 donandogli più stabilità. (manico in tre pezzi)


Prestige Wizard--these are are the five piece necks that come on the lower-priced MIJ RGs in Ibanez's current lineup. Slightly thicker and wider due to the five piece construction.
Thickness at 1st fret: 18mm
Thickness at 12th fret: 20mm
Radius: 430mm
Very stable, though a bit thicker.

Sempre ottilissimo il prestige essendo costruito in cinque pezzi è il più stabile.

 Prestige Super-Wizard HP--these are the slimmest necks currently sold by Ibanez, and attempting to return to Original Wizard measurements (only wider).
Thickness at 1st fret: 17mm
Thickness at 12th fret: 19mm
Radius: 430mm
Five piece construction--very stable, very slim.

Il Prestige Super Wizard Hp viene definito come il più stabile della serie e uno dei più sottili.

 Wizard II--these are thicker than the Wizard necks, and generally found on mid-range MIK and MII RGs.
Thickness at 1st fret: 19mm
Thickness at 12th fret: 21mm
Radius: 400mm
Thicker front to back than the Wizard and with a narrower radius, making bends slightly tougher (still much flatter than Fender).


Il Wizard II come possiamo vedere al primo tasto è di 19millimetri due in più del Wizard e al dodicesimo 21 millimetri
Il Wizard II anche se sempre abbastanza sottile ha anche un maggiore Radio (se non si sa cos'è il radio consultate un mio precedente articolo.)
Un Feeling più classico.

Wizard III--same specs as the Wizard II, just widened to fit the 58mm neck pockets on the new guitars.

Nel Wizard III cambia solo lo zoccolo del manico che è un pò più grosso ma in realtà la misure in millimetri sono le stesse.

JEM--this is a tough one. The JEM neck profile has changed a lot over the years, although Ibanez hasn't changed the official numbers they list in the catalog. So, here's the numbers from the catalog:
Thickness at 1st fret: 19mm
Thickness at 12th fret: 21mm
Radius: 430mm

Il Jem si può definire un Wizard II con un radio di 430mm (inferiore al Wizard II standard che ha un radio di 400mm).





Firmato
Umby.

Nessun commento:

Posta un commento